128 THORNES LANE - WAKEFIELD - WEST YORKSHIRE
Please Note - All product images are for illustration purposes only.
Actual product will vary depending on the specifications of the product selected.
Harnessflex AB16-PG09 Straight Conduit Fitting
Sealed straight fitting
Straight compression type fittings incorporating fixed or swivel male threads to provide connection to knockouts and threaded entries. These fittings are designed for use with all types of unslit Harnessflex conduit, maintaining maximum conduit bore.
Technical Spec
| GID | 7TCA298010R0054 |
|---|---|
| Temperature Resistance | Standard Temperature |
Competitive Pricing
Cost-effective solutions
Quality Products
Trusted quality
Industry Knowledge
30+ years of experience
Customer Driven
Tailored solutions
Sealed straight fitting
Straight compression type fittings incorporating fixed or swivel male threads to provide connection to knockouts and threaded entries. These fittings are designed for use with all types of unslit Harnessflex conduit, maintaining maximum conduit bore.
Features
- IP67 – IP68 (2 bar for 30 minutes) SRN sealing bush protects against ingress of water and dust.
- Cap-nut retention ring ensures integrity of assembly under extreme vibration
- Available with metric, PG fixed male, NPT & PF threads.
- Includes flat seal washer providing a seal between panel / bulkhead and fitting.
- Polyamide (Nylon) 66
- Temperature Range: -40ºC to 150ºC
- Very high UV resistance
- Self extinguishing, low smoke toxicity & halogen free
Conformity
- ADR approved (NC conduits ONLY)
- CE Mark to the low voltage directive
- RoHS Compliant to 2011/65/EU
- Conforms with end of life vehicle directive (ELV) EU200/53/EC
| Brand | Harnessflex |
|---|---|
| GID | 7TCA298010R0054 |
| Temperature Resistance | Standard Temperature |
You must be logged in to post a review.
Harnessflex ® is a leading designer and manufacturer of flexible conduit systems and connector interfaces that protect critical electrical wiring in the automotive industry.
Harnessflex is principally focused on chassis and engine manufacturers within bus, agricultural and heavy duty vehicle markets. A wide range of slit and unslit corrugated flexible conduits are available in a variety of materials. Used in combination with Harnessflex sealed or hinged fittings or connector interfaces they can meet the exacting needs for protection of heavy vehicle wiring harnesses.
Delivery & Shipping
AES Export proudly ships to over 50 countries and has the capability to deliver worldwide. With our reliable logistics network and experienced team, we ensure smooth and efficient shipping to your location, wherever you are.
We offer low MOQs, competitive pricing, and short lead times, along with custom packaging and full customs/export compliance.
Our collection-ready service (Ex-Works – INCOTERMS) gives customers the flexibility to use their preferred shipper, ensuring a smooth and efficient process.
Get in touch with us, and we’ll work out the best way to get your order to you hassle-free.
Frequently asked questions
What are your typical lead times?
At AES Export, we aim to ship products as quickly as possible. Typically, we dispatch items based on the customer's expected delivery date to ensure timely arrival.
Do you hold all items in stock?
We hold a huge range of Harnessflex items in stock. However, any non stocked items, or out of stock items, can usually be obtained rapidly.
Can you mark packaging with custom part numbers?
Yes. We offer bespoke labeling and packaging on all products.
Do you help prevent port and customs delays?
Yes, AES Export provides the necessary documentary evidence for both the importing and exporting countries, ensuring smoother customs clearance and helping to avoid unnecessary delays.
Do you offer support with customs and freight forwarding?
Yes, we provide comprehensive customs and freight forwarder support, helping to minimise delays across air, sea, rail, and road shipments.
Can AES Export help with warehousing?
What do I do if the shipment is damaged or has items missing?
Please inform both the carrier and our team immediately. Retain the damaged packaging, as it may be required for carrier inspection. We will initiate a thorough investigation and take the necessary steps to resolve the issue.
Frequently Asked Questions
Do you hold all items in stock?
We hold a huge range of Harnessflex items in stock. However, any non stocked items, or out of stock items, can usually be obtained rapidly.
Can you supply drawings or data sheets?
We provide drawings and downloadable datasheets for each product in the catalogue section where possible.
We can email or post datasheets upon request.
Can I purchase smaller than boxed quantities?
Yes, AES Export offers a wide range of bespoke automotive wiring protection solutions and aftermarket products.
With thousands of combinations in our inventory, we can provide high-quality solutions for projects of any size, whether large or small.
Can you source a specific part that isn’t in stock?
Absolutely! We’ll be happy to locate the part for you and ensure it’s available as quickly as possible.
Please reach out to us at [email protected] or call us at +44 (0) 1924 364464.
Can AES Export help with warehousing?
Yes, AES Export can support your warehousing needs. We stock large volumes of goods, so you don't have to. Simply send us a 'call off' purchase order when you're ready to receive your stock.
Related Products
Adaptaflex AL16/M20/C90/BL 90° Elbow Conduit Fitting – pack of 10
he Adaptaflex AL16/M20/C90 90° elbow conduit fitting is designed for secure connection of 16 mm nominal conduit to M20 threaded entries or knockouts where a right-angle layout is required. Made from high-grade polyamide (Nylon) 66 with aluminium reinforcement, it offers excellent mechanical strength, chemical resistance, and long-lasting durability. The single-piece, tamper-proof design ensures a reliable fit and reduces maintenance needs.
Adaptaflex AL16/M16/C90/BL 90° Elbow Conduit Fitting – pack of 10
The Adaptaflex AL16/M16/C90 90° elbow conduit fitting provides a strong and reliable connection for 16 mm nominal conduit to M16 threaded entries or knockouts where a right-angle configuration is required. Constructed from high-quality polyamide (Nylon) 66 combined with aluminium, it delivers excellent mechanical strength, chemical resistance, and long-term durability. Its single-piece, tamper-proof design ensures secure installation and minimal maintenance requirements.
Adaptaflex AL13/M16/C90/BL 90° Elbow Conduit Fitting – pack of 10
The Adaptaflex AL13/M16/C90/BL 90° elbow conduit fitting is designed to provide a secure and durable connection between 13 mm nominal conduit and M16 threaded entries or knockouts where a right-angle configuration is required. Manufactured from high-quality polyamide (Nylon) 66 combined with aluminium, it offers exceptional strength, chemical resistance, and long service life. Its single-piece, tamper-proof design ensures reliable installation and reduced maintenance.
Adaptaflex AL21/M20/A/BL Straight Conduit Fitting – pack of 10
The Adaptaflex AL21/M20/A straight conduit fitting provides a secure and durable connection for 21 mm nominal conduit to M20 threaded entries or knockouts. Made from high-quality polyamide (Nylon) 66 in black, it offers excellent mechanical strength, chemical resistance, and long-term reliability. Part of the Adaptalok Type A range, it is designed for use with PAFS21 conduit and comes complete with a locknut for easy installation.
Reviews
There are no reviews yet.