Showing 25–36 of 740 results

Battery Disconnect Low Voltage 200 amp 12/24 volt Bx 1

Durite solid state battery guard, monitors the battery voltage and disconnects a load when the battery voltage reaches a pre-determined level. The voltage level at which the device operates to disconnect or reconnect the load to the battery can be set to one of 10 different programmes by the installer using a simple bridge and integral LED indicator.{{bul}External on/off switch{/bul}{bul}2 x M10 brass studs, 4 x 6.3mm blade{/bul}{bul}500mA maximum{/bul}{bul}Protected to IP65{/bul}{bul}UKCA, CE & ECE approved{/bul}}

Battery Disconnect Low Voltage 40 amp 12/24 volt Bx 1

40 amp solid state battery guard, with provision for external on/off switch, l 76 x w 78 x h 33mm. 12/24 volt. Protected to IP65. ECE and CE approved.

Battery Isolator 250 amp with Fixed ‘T’ Key Bg1

Battery isolator. Rated 250 amps at 24 volts and 2150 amps for 5 seconds. M10 terminals. Requires 30.5mm hole. Protected to IP67.

Battery Switch 100 amp with Fixed Key

For 5 seconds. M10 studs and requires 19.5mm hole. Replaces SSB106.

Battery Switch 100 amp with Ignition Kill and Removable Key Bg1

Battery isolator with removable key and splashproof cover. With independent ignition switching and controlled earth leakage through a resistor to avoid damage through load dumping. Rated 100 amps at 24 volts and 500 amps for 5 seconds. M10 studs.

Battery Switch 100 amp with Removable Key Bg1

Battery isolator with removable key in the ?On? or ?Off? positions. Rated 100 amps at 24 volts, 500 amps for 5 seconds. M10 studs and 22.5mm hole. Supplied with 2 keys.

Battery Switch 100 amp with Removable Key Bg1

Battery isolator with removable key and splashproof cover. Rated 100 amps at 24 volts and 500 amps for 5 seconds. M8 studs and requires 24mm hole.

Battery Switch 150 amp with Removable Key Bg1

Durite?s Single Pole Single Throw On/Off Isolator with removable handle. Used for isolating vehicle battery's. 24VDC Max. 150A Continuous. 1000A Max for 5 Seconds. M10 Terminals Tightening Torque 0.9+ - 0.1 daNm. Copper Contacts. Connections not polarized. Protected to IP65.

Battery Switch 250 amp 24 volt Remote Double Pole Bg1

Battery isolator, 24 volt, double pole, remotely switched electrically. Isolated return. Rated 250 amps at 24 volts and 2,500 amps for 5 seconds. Terminal sizes M10 and M5. Protected to IP65. CE approved.

Battery Switch 300 amp 12 volt Remote Single Pole Bx1

Remotely switched electrically. Bosch ?U? type fixing bracket. Rated at 300 amps continuous, 600 amps for 20 seconds and 2400 amps for 1 seconds. M10 and M5 studs.

Battery Switch 300 amp 24 volt Remote Single Pole Bx1

With auxiliary circuit remotely switched electrically. Bosch ?U? type fixing bracket. Rated at 300 amps continuous, 600 amps for 20 seconds and 2400 amps for 1 seconds. M10 and M5 studs.

Battery Switch 75 amp Marine with Removable Key Bg1

Marine battery isolator with removable key and splashproof cover. Rated 75 amps at 24 volts, 200 amps for 5 seconds. M8 studs and requires 22.5mm hole. Protected to IP67.